Experiments on flow through an orifice plate of diameter d mounted in a length of pipe of diameter D show that the pressure drop is a function of the orifice diameter, pipe diameter, fluid velocity, and fluid density and viscosity. Determine the dimensionless parameters that represent this situation.
Answers
These dimensionless parameters can be used to describe the pressure drop through an orifice plate in a pipe and to understand the influence of the orifice and pipe dimensions, fluid velocity, and fluid density and viscosity on the flow characteristics.
What is Froude number formula?The ratio of flow inertia to the external field is known as the Froude number, a dimensionless number.
There are several dimensionless parameters that can be used to represent the pressure drop through an orifice plate in a pipe.
These parameters are typically used to describe the flow characteristics of the fluid and the influence of the orifice and pipe dimensions on the pressure drop.
One common dimensionless parameter is the Reynolds number, which represents the ratio of inertial forces to viscous forces in the flow. It is defined as:
Re = (D * v * rho) / mu
where D is the pipe diameter, v is the fluid velocity, rho is the fluid density, and mu is the fluid viscosity.
Another dimensionless parameter that is often used is the discharge coefficient, which represents the efficiency of the orifice in allowing fluid to flow through it. It is defined as:
Cd = (Q_actual) / (Q_theoretical)
where Q_actual is the actual flow rate through the orifice and Q_theoretical is the theoretical flow rate through the orifice as calculated using Bernoulli's equation.
Another dimensionless parameter that is often used is the beta ratio, which is defined as the ratio of the orifice diameter to the pipe diameter. It is given by:
beta = d / D
where d is the orifice diameter and D is the pipe diameter.
Finally, the Froude number, which represents the ratio of inertial forces to gravitational forces in the flow, is also often used. It is defined as:
Fr = (v^2) / (g * D)
where v is the fluid velocity, g is the acceleration due to gravity, and D is the pipe diameter.
These dimensionless parameters can be used to describe the pressure drop through an orifice plate in a pipe and to understand the influence of the orifice and pipe dimensions, fluid velocity, and fluid density and viscosity on the flow characteristics.
To learn more about Reynolds number refer :
https://brainly.com/question/13987238
#SPJ4
Related Questions
Back Savers is a company that produces backpacks primarily for students. They are considering offering some combination of two different models—the Collegiate and the Mini. Both are made out of the same rip-resistant nylon fabric. Back Savers has a long-term contract with a supplier of the nylon and receives a 5000 square-foot shipment of the material each week. Each Collegiate requires 3 square feet while each Mini requires 2 square feet. The sales forecasts indicate that at most 1000 Collegiates and 1200 Minis can be sold per week. Each Collegiate requires 45 minutes of labor to produce and generates a unit profit of $32. Each Mini requires 40 minutes of labor and generates a unit profit of $24. Back Savers has 35 laborers that each provides 40 hours of labor per week. Management wishes to know what quantity of each type of backpack to produce per week. (b) Use the graphical method by hand to solve this model (NOT THE CORNER POINT METHOD).
Answers
four working ladies a,b c,d are sitting around a table
1) a sits opposite to cook
2.b sits on the right side of the beautician
3.teacher is on the left side of an accountant
4.d sits opposite to c
5.c is to the right of the accountant
Answers
Answer:
A accountant
D teacher
B cook
C beautician
Explanation:
C is on the right of the accountant, so D (opposite C) is the teacher. The accountant is to the right of the teacher, so cannot be B, and must be A. Then B (opposite A) is the cook, and C (left of B) is the beautician.
__
Clockwise from A:
A accountant
D teacher
B cook
C beautician
2. The first step to start a new file in Inventor is *
Answers
The process to begin a new file in Inventor is simple and straightforward. To start a new file, you must take the following steps:1. Start Inventor: To start Inventor, double-click the Inventor icon on your desktop. Alternatively, go to Start menu>All Programs>Autodesk>Inventor to access it.2.
Start New File: After starting Inventor, you must select the option New to create a new file. It can be done in two ways: either by clicking the New icon on the toolbar or by selecting New from the File menu.3. Select the File Type: After selecting the New option, you will be presented with various file types to choose from, such as Part, Assembly, Drawing, or Presentation. You must choose the appropriate file type for your project. For example, choose a Part file if you want to design a 3D object, choose an Assembly file if you want to create an assembly of multiple parts, choose a Drawing file if you want to create a 2D drawing of your 3D object, or choose a Presentation file if you want to create a multimedia presentation of your 3D object.4.
Choose the Template: After selecting the file type, you must choose the appropriate template from the list of available templates. You can either select a default template or a custom template. The template will contain all the required settings and parameters for your project, such as units of measurement, font styles, drawing sheet size, etc.5. Save the File: After selecting the template, you must save the file by providing a suitable file name and location. Once saved, you can start working on your project by adding components, features, and constraints as per your requirements.In conclusion, these are the steps required to start a new file in Inventor. By following these steps, you can quickly start working on your new project.
To know more about Inventor visit:
https://brainly.com/question/30765233
#SPJ11
Which of these is a factor that determines if a speed is safe for your boat?
Answers
Explanation:
This question does not indicate the options to choose from, so I'll just outline the factors that determine if the nautical speed is safe for your boat.
When travelling with your boat, or just cruising around on your boat, It is necessary to consider the following factors before deciding if the speed you're travelling with is safe. These factors are:
1. The weather and marine conditions: One should calculate for the wind speed and direction, the water current, and the general condition of the water body.
2. The traffic density on the water at that instance: You should be mindful of other vessels on the water body before choosing your safe speed. The area available, and the proximity of these vessels to your boat should be considered
3. Visibility: The degree of visibility is a very important factor when determining what speed is safe for you. The speed should be chosen such that there is enough room and time to easily maneuver in order to prevent collision with an obstacle. Visibility can be impaired by fog, mist and cloudiness.
4. The responsiveness of your vessels: The ease with which your vessel responds to sudden change in direction should be considered. You shouldn't travel at a high speed if your boat is slow to respond to being maneuvered.
5. Other navigational hazards: Other navigational facilities and their proximity like buoys should be accounted for when choosing your vehicle speed.
Other factors includes:
draft of the vessel, limitations of radar equipment, and the wake your vehicle will leave at this speed.
From these listed factors, I think you should be able to pick out your answer.
What’s cat plus cat
?
Answers
leadership, according to weibler, can be understood as ...
Answers
Explanation:
Leadership, according to Weibler, can be understood as a process of social influence in which an individual inspires and directs the behavior and goals of a group towards a common vision."
According to Weibler, leadership can be understood as the process of influencing and guiding individuals or groups towards a common goal. Weibler believes that effective leaders have the ability to inspire, motivate, and empower others to achieve their full potential. This requires a combination of personal qualities, such as vision, integrity, and charisma, as well as a deep understanding of the needs and motivations of the people being led. Weibler also emphasizes the importance of leaders adapting to changing circumstances and being able to effectively navigate complex situations and challenges.
Hey everyone!
This question is hard.
What specific fluid goes in the windshield wipers? (I never drove a car before)
And how much to put in fluid ounces? (So you don't blow a car up)
Answers
I’ve never driven either. But I’m pretty sure there is not really specific fluid you have to use. Just to name a few are Rain-X Bug Remover Windshield Washer Fluid, Prestone AS657 Deluxe 3-in-1 Windshield Washer Fluid.
For how much, there should be a little line or 3/4th of the way full.
Hope this helps!
Answer:
What specific fluid goes in the windshield wipers.
Distilled water
How much to put in fluid ounces?
There should be a tiny bit more than 3/4 of the way full.
How are weather and climate different
Answers
Answer:
- weather refers to short-term changes in the atmosphere
- climate describes what the weather is like over a long period of time in one area.
Identify the transformation. Note: you can only submit this question once for marking. translation rotation shear projection none of the above
Answers
Answer:
The answer is "shear".
Explanation:
Every transformation could be shown by some kind of conventional matrix.
Its standard matrices of shape k here could be any real value enabling shear transformation to parallel to the y axis.
\(\left[\begin{array}{cc}1&0\\k&1\\\end{array}\right]\)
This coefficient matrix A is the standard matrix during transformation. With the use of a the transformation could be entered into T(x)=Ax
And standard transfer function is standard.
\(\left[\begin{array}{cc}1&0\\6&1\\\end{array}\right]\)
The matrix in the form of the shear matrix.
Rear axles are usually lubricated by the same gear oil that lubricates the differential. True or false
Answers
Answer:
true
Explanation:
In Databrawl, what team is most powerful?
A) Virus
B) Malware
C) Firewall security
D) Programs
Answers
Answer:
I would say Firewall security. Malware is pretty corrupting, but the firewall I think is good for protection if you have a good one.
Explanation:
A river has an average rate of water flow of 59.6 M3/s. This river has three tributaries, tributary A, B and C, which account for 36%, 47% and 17% of water flow respectively. How much water is discharged in 30 minutes from tributary B?
Answers
Answer:
50421.6 m³
Explanation:
The river has an average rate of water flow of 59.6 m³/s.
Tributary B accounts for 47% of the rate of water flow. Therefore the rate of water flow through tributary B is:
Flow rate of water through tributary B = 47% of 59.6 m³/s = 0.47 * 59.6 m³/s = 28.012 m³/s
The volume of water that has been discharged through tributary B = Flow rate of water through tributary B * time taken
time = 30 minutes = 30 minutes * 60 seconds / minute = 1800 seconds
The volume of water that has been discharged through tributary B in 30 seconds = 28.012 m³/s * 1800 seconds = 50421.6 m³
9. Calculate the total resistance and current in a parallel cir-
cuit with three resistors of 4, 8, and 16 ohms, using any
one of the five methods (calculator suggested). What is
the total resistance and current?
a. 27 ohms (0.4 ampere)
b. 14 ohms (0.8 ampere)
c. 4 ohms (3.0 amperes)
d. 2.3 ohms (5.3 amperes)
Answers
Answer:
d. 2.3 ohms (5.3 amperes)
Explanation:
The calculator's 1/x key makes it convenient to calculate parallel resistance.
Req = 1/(1/4 +1/8 +1/16) = 1/(7/16) = 16/7 ≈ 2.3 ohms
This corresponds to answer choice D.
__
Additional comment
This problem statement does not tell the applied voltage. The answer choices suggest that it is 12 V. If so, the current is 12/(16/7) = 21/4 = 5.25 amperes.
if the oil light on your dashboard illuminates, the best thing to do is
Answers
If the oil light on your dashboard illuminates, the best thing to do is to immediately stop the engine and check the oil level.
When the oil light on the dashboard comes on, it typically indicates low oil pressure. Low oil pressure can be caused by a variety of issues, such as low oil level, a faulty oil pump, or an oil leak. Ignoring the oil light and continuing to drive can lead to severe engine damage due to inadequate lubrication. Therefore, it is crucial to stop the engine as soon as possible to prevent further harm. After stopping, check the oil level using the dipstick and add oil if necessary. If the oil level is sufficient, it is advisable to seek professional assistance to diagnose and resolve the underlying issue.
You can learn more about engine at
https://brainly.com/question/25870707
#SPJ11
pressure tunnel and tunnel lining are the types of tunnels?
Answers
Answer:
the support system of tunnel or shaft
Explanation:
i just looked it up
All of these are part of the seat belt assembly EXCEPT the:
O latch plate
O D-ring
O retractor.
O cushion
Answers
Explanation: All parts going together to form a seat belt except the cushion
write a program that reads in hours, minutes, and seconds as input, and outputs the time in seconds only. ex: if the input is:
Answers
This program takes input for hours, minutes, and seconds and converts them into the total time in seconds. It can be used to perform simple time conversions and calculations based on user input.
Here's an example program in Python that reads hours, minutes, and seconds as input and converts them into seconds:
# Read hours, minutes, and seconds as input
hours = int(input("Enter the hours: "))
minutes = int(input("Enter the minutes: "))
seconds = int(input("Enter the seconds: "))
# Convert time to seconds
total_seconds = (hours * 3600) + (minutes * 60) + seconds
# Output the result
print("The total time in seconds is:", total_seconds)
The program prompts the user to enter the hours, minutes, and seconds using the input() function and stores the values in the respective variables.The time is then converted into seconds by multiplying the hours by 3600 (since there are 3600 seconds in an hour), adding the minutes multiplied by 60 (since there are 60 seconds in a minute), and adding the seconds.The result is stored in the total_seconds variable.Finally, the program displays the total time in seconds using the print() function.Example usage:
Enter the hours: 2
Enter the minutes: 30
Enter the seconds: 45
The total time in seconds is: 9045
Learn more about function visit:
https://brainly.com/question/13034531
#SPJ11
it is erroneous to call dup2(src, target) on a target file descriptor that already exists; you must close the target prior to dup2() to avoid failure. true false
Answers
True. It is erroneous to call dup2(src, target) on a target file descriptor that already exists. You must close the target file descriptor prior to calling dup2() to avoid failure.
When using the dup2() system call, if the target file descriptor already exists, it must be closed prior to calling dup2().
If the target file descriptor is not closed, the call to dup2() will fail and return an error. This is because dup2() works by copying the source file descriptor to the target file descriptor. This is because dup2() will attempt to make the target file descriptor a copy of the source file descriptor, and if the target file descriptor already exists, it could lead to potential issues and failures. Closing the target file descriptor first ensure a clean and successful operation.If the target file descriptor is already in use, it cannot be overwritten with the new source file descriptor.To avoid this error, it is important to ensure that the target file descriptor is closed prior to calling dup2(). This can be achieved using the close() system call to close the file descriptor.In summary, it is erroneous to call dup2(src, target) on a target file descriptor that already exists without first closing the target file descriptor. By closing the target file descriptor prior to calling dup2(), you can avoid any potential failures and ensure that the system call operates as intended.Know more about the file descriptor
https://brainly.com/question/29608255
#SPJ11
in general, fall protection must be provided to construction workers who are working on surfaces with unprotected sides and edges which are above the lower level
Answers
The threshold when no explicit rule is in effect is six feet, which is the standard rule for the construction industry.
When might fall protection be necessary when working close to an unprotected edge? The threshold when no explicit rule is in effect is six feet, which is the standard rule for the construction industry.Each employee must be prevented from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems when on a walking or working surface (horizontal or vertical) with an unprotected side or edge that is 6 feet (1.8 m) or higher over a lower level.Fall protection is required by OSHA in general industrial workplaces at altitudes of four feet, in shipyards at elevations of five feet, in the construction sector at elevations of six feet, and in long shoring operations at elevations of eight feet.An adequate load must be supported by the anchorage point.For fall restraint or placement, a harness (or body belt) must be worn in accordance with the manufacturer's instructions.
To learn more about OSHA refer
https://brainly.com/question/13591663
#SPJ4
In older cities across South Africa, infrastructure is deteriorating, including water lines that supply homes and businesses. A report to the Gqeberha municipal council stated that there are on average 30 water line breaks per 100km’s a year in the city. Outside Gqeberha, the number of breaks is 15/km a year
Answers
Where the above conditions are given:
A) we can calculate this probability to be approximately 0.1665 or 16.65%.
B) we can calculate this probability to be approximately 0.1612 or 16.12%.
a) Let X be the number of water line breaks in a stretch of 100kks in Gqeberha in a year. We know that X follows a Poisson distribution with λ = 30. To find the probability of 35 or more breaks, we can use the Poisson distribution formula:
P(X ≥ 35) = 1 - P(X < 35) = 1 - Σi=0^34 e^(-30) * 30^i / i!
Using a calculator or software, we can calculate this probability to be approximately 0.1665 or 16.65%.
b) Let Y be the number of water line breaks in a stretch of 100kks outside of Gqeberha in a year. We know that Y follows a Poisson distribution with λ = 15. To find the probability of 12 or fewer breaks, we can again use the Poisson distribution formula:
P(Y ≤ 12) = Σi=0^12 e^(-15) * 15^i / i!
Using a calculator or software, we can calculate this probability to be approximately 0.1612 or 16.12%.
Learn more about probability at:
https://brainly.com/question/30034780
#SPJ1
Full Question:
Although part of your question is missing, you might be referring to this full question:
In Older Cities Across South Africa, Infrastructure Is Deteriorating, Including Water Lines That Supply Homes And Businesses. A Report To The Gqeberha Municipal Council Stated That There Are On Average 30 Water Line Breaks Per 100 ’ A Year In The City. Outside Gqeberha, The Number Of Breaks Is 15/ A Year. A) Find The Probability That In A
In older cities across South Africa, infrastructure is deteriorating, including water lines that supply homes and businesses. A report to the Gqeberha municipal council stated that there are on average 30 water line breaks per 100 ’ a year in the city. Outside Gqeberha, the number of breaks is 15/ a year.
a) Find the probability that in a stretch 100 ’ in Gqeberha there will be 35 or more breaks next year. (3)
b) Find the probability that there will be 12 or fewer breaks in a stretch of 100 ′ outside of Gqeberha next year.
What makes it challenging to build new nuclear power stations in the UK?
Answers
One of the major reasons is the high cost associated with the construction of new nuclear plants.
The construction and operation of nuclear plants require a significant amount of capital investment, which makes it difficult for investors to take the risk. Additionally, the high cost of decommissioning nuclear plants and the disposal of radioactive waste is also a major concern.
Another challenge associated with building new nuclear power stations is public opposition. Many people are skeptical about the safety of nuclear power, especially after incidents like in Japan. This has led to protests and campaigns against the construction of new nuclear plants, making it difficult for the government to get public support.
The lengthy regulatory process is also a major challenge in building new nuclear power stations in the UK. The approval process involves multiple stages and can take several years to complete. This results in significant delays and increased costs.
Furthermore, the lack of skilled labor and expertise in the nuclear industry is also a challenge. Many of the skilled workers in the industry are approaching retirement age, and there is a shortage of new workers to replace them.
In conclusion, building new nuclear power stations in the UK is a challenging task due to high costs, public opposition, regulatory hurdles, and a shortage of skilled workers. Addressing these challenges will be essential for the successful development of new nuclear power stations in the future.
Learn more about nuclear power :
https://brainly.com/question/9859575
#SPJ11
the two prerequisites for the emergence of cybercrime were:
Answers
The two prerequisites for the emergence of cybercrime were the advent of computer technology and the internet.
Cybercrime, also known as computer crime, refers to any criminal activity that is committed using a computer or the internet. Cybercrime has grown increasingly prevalent with the advent of computer technology and the internet.The Emergence of Cybercrime.
The emergence of cybercrime was a result of two key factors. The first was the rise of computer technology. Computer technology made it possible for people to store and manipulate large quantities of data with ease. It also made it easier to communicate over long distances.
The second factor was the advent of the internet. The internet made it possible for people to communicate and exchange information globally.Cybercrime is a serious problem that affects individuals and organizations worldwide. The two prerequisites for the emergence of cybercrime were the advent of computer technology and the internet.
Learn more about cybercrime
https://brainly.com/question/30093358
#SPJ11
Select three mechanical processes used in the manufacturing phase of engineering.
Drying
Mixing
Cooling
Crystallization
Size reduction
Food packaging
Answers
Answer:Size reduction
Cooling
Mixing
Explanation:
what is linear programming and provide examples of the use of
it, please :)
thank you :)
Answers
Linear programming is a mathematical method used to find the best possible outcome in a given situation, subject to certain constraints It involves optimizing a linear objective function
which is a mathematical representation of a goal, such as maximizing profit or minimizing costs, while considering linear constraints, which are limitations or restrictions on the decision variables Production Planning: A company wants to determine the optimal production levels for different products to maximize profit. Linear programming can be used to allocate limited resources, such as labor and raw materials, to different products, while satisfying demand and capacity constraints.
A shipping company needs to determine the most efficient way to transport goods from multiple origins to multiple destinations, while minimizing transportation costs. Linear programming can be used to optimize the allocation of goods to different routes, taking into account capacity restrictions and transportation cost An investor wants to allocate funds across different assets, such as stocks, bonds, and commodities, to maximize the return on investment while considering risk. Linear programming can be used to determine the optimal allocation of funds to different assets, taking into account expected returns, risk levels, and investment constraints.
To know more about programming visit:-
https://brainly.com/question/33366317
#SPJ11
Adhered ceramic veneer has a thickness of less than _______.
O 1/4 inch
O 1/2 inch
O 3/4 inch
O 1 inch
Answers
Answer:
the answer is D
Explanation:
i took the test
Adhered ceramic veneer has a thickness of less than 1 inch. Thus, option D is correct.
What will be the calculation for thickness?the width of the wall is 21 3/8 = 171/8
the width of a tile is 4 1/2 = 9/2
so the number of tiles is
(171/8) / (9/2) = 171x2 / (9 x8) = 4.75
so the no of tiles needed is 5.
The numbers of large bowl sold at the fair is 20
Data;
Total bowl sold = 32
Total amount made = $916
Cost of small ceramic bowl = $18
Cost large bowl = $35
System of Equation
To solve this problem, we need to write system of equations for this.
Let x represent the numbers of small ceramic bowl
let y represent the numbers of large ceramic bowl
We want to simplify:
102 * 4 - 3(8 * 8 * 1)
We will apply BODMAS:
Solving the Bracket first:
102 * 4 - 3(64)
102 * 4 - 192
=> 408 - 192
= 216 cubic inches
He will need 216 cubic inches of packing foam.
Therefore, Adhered ceramic veneer has a thickness of less than 1 inch. Thus, option D is correct.
Learn more about thickness on:
https://brainly.com/question/11669043
#SPJ2
a cubical box 20-cm on a side is contructed from 1.2 cm thick concrete panels. A 100-W light bulb is sealed inside the box. What is the temperature on teh inside ofthe box when the light is on and the outside temperature is 20C
Answers
Answer:
Temperature on the inside ofthe box
Explanation:
The power of the light bulb is the rate of heat conduction of the bulb, \(dq/dt = 100 W\)
The thickness of the wall, L = 1.2 cm = 0.012m
Length of the cube's side, x = 20cm = 0.2 m
The area of the cubical box, A = 6x²
A = 6 * 0.2² = 6 * 0.04
A = 0.24 m²
Temperature of the surrounding, \(T_0 = 20^0 C = 273 + 20 = 293 K\)
Temperature of the inside of the box, \(T_{in} = ?\)
Coefficient of thermal conductivity, k = 0.8 W/m-K
The formula for the rate of heat conduction is given by:
\(dq/dt = \frac{kA(T_{in} - T_0)}{L} \\\\100 = \frac{0.8*0.24(T_{in} - 293)}{0.012}\\\\T_{in} - 293 = \frac{100 * 0.012}{0.8*0.24} \\\\T_{in} - 293 = 6.25\\\\T_{in} = 293 + 6.25\\\\T_{in} = 299.25 K\\\\T_{in} = 299.25 - 273\\\\T_{in} = 26.25^0 C\)
– A cloud customer has asked you to do a forensics analysis of data stored in on CSP’s server. The customer’s attorney explains that the CSP offers little support for data acquisition and analysis will help you with data collection for a fee. The attorney asks you to prepare a memo with detailed questions of what you need to know to perform the task .She plans to use this memo to negotiate for services you will provide in collecting and analyzing evidence .Write a one –to two page menu with questions to ask the CSP .
Answers
Answer:
A one -two pages menu was written with questions directed to the CSP which is stated below in the explanation section
Explanation:
Solution
If CSP has no team or limited staff, you will need to ask the following questions to understand how the CSP is set up:
Is detailed knowledge of cloud topology, storage devices is available ?Are there any restrictions in taking digital evidence from a cloud storage?For e-discovery demands on multi tenant cloud systems, is the data of investigation local or remote?Does the investigator have the power to make use of cloud staff conduct an investigation? What is the relationship of CSP's with cloud users?What are the SLA's and what are the guidelines to define them ? SLAs should also specify support options, penalties for services not provided, system performance,fees, provided software/hardware. CSP must explain who has the right to access the data ? and limitations for conducting acquisitions for an investigation.For guidelines of operations, digital forensics should review CSP's policies, and standards..What are the CSP's business continuity and disaster recovery plans.Are there Any plans to revise current laws ?Are there Any cases involving data commingling with other customer's data?Ask What law controls data stored in the cloud is a challenge?To access evidence in the cloud :
What is the configuration of the CSP?Is the data storage location secretly kept or it is open ?Are there any court orders, subpoenas with prior notice, search warrants etc?What are the procedures for log keeping ? so that complications we not arise in the investigations chain of evidence.What is the configuration of the CSP?What is the right key of encryption to read the data if at all the CSP has provided encryption to the data.Is there any threat from hackers so that they will not use any malware an modify the file meta data?Does CSP have a personnel trained to respond to network incidents?Who are the data owners, identity protection, users and access controls for a better role management.write three ways of soil investigation of a site
Answers
Open excavation.
Borings.
Subsurface soundings.
Geographical methods.
A germanium diode carries a current of 1 mA at room temperature when a forward bias of 0.15v is applied. Estimate the reverse saturation current at room temperature.
Answers
I = I0 * (exp(qV/kT) - 1)
where I is the current through the diode, q is the charge of an electron, V is the voltage across the diode, k is Boltzmann's constant, and T is the temperature in Kelvin.
At room temperature, T = 298 K. We are given that the diode carries a current of 1 mA when a forward bias of 0.15 V is applied. Let's assume that the diode is ideal, meaning that it has no series resistance, so the voltage across the diode equals the forward bias voltage.
Plugging in these values, we get:
1E-3 A = I0 * (exp((1.602E-19 C)(0.15 V) / (1.381E-23 J/K)(298 K)) - 1)
Simplifying, we get:
1E-3 A = I0 * (exp(0.01275) - 1)
1E-3 A / (exp(0.01275) - 1) = I0
I0 = 2.34E-12 A, or approximately 0.23 nA. Therefore, the estimated reverse saturation current at room temperature is 0.23 nA.
Role of energy consumption in formulating energy policies.
Answers
The Role of energy consumption in formulating energy policies are:
It is the regulatory framework on which global attractiveness is built.It helps widen access to electricity.It helps improve clean cooking fuels.It helps in elimination of deadly air pollution.What is the importance of energy policy?Energy policy is known to be a vital factor in economic development as it is known to be the total regulatory framework that helps to know the boast in global attractiveness and others.
Note that he Role of energy consumption in formulating energy policies are:
It is the regulatory framework on which global attractiveness is built.It helps widen access to electricity.It helps improve clean cooking fuels.It helps in elimination of deadly air pollution.Learn more about Energy policy from
https://brainly.com/question/10732684
#SPJ1