Select from the choices below those that are network baseline statistics. (note select only the correct choices)Peak utilizationDMZ failuresData leakageRouter hopsAverage utilizationTotal collisions, runts, giantsCRC errorsMinimum utilization
Answers
The best performance measurements for your network can be found by measuring it over a specific length of time.
A network baseline report is what? Network Baselines are ideal performance indicators that are discovered by observing your network over a specific length of time.In order to discover the "normal" functioning level of network devices, administrators can use baseline statistics to assess their existing network's state by identifying recommended performance requirements.When there are complaints about network problems, the baseline data is frequently used.You can identify the abnormalities, for instance, by comparing the real-time data the analyzer collects with the baseline data when network performance declines.When there are unusual traffic patterns, baseline measurements shouldn't be made because the results would give a false impression of how the network normally functions.Regular network baseline analyses must to be carried out.
To learn more about network baseline refer
https://brainly.com/question/29315075
#SPJ4
Related Questions
Click this link to view O*NET’s Work Styles section for Human Resources Managers. Note that common work styles are listed toward the top and less common work styles are listed toward the bottom. According to O*NET, what are common work styles needed by Human Resources Managers? Select three options.
Answers
Answer:
there's no link to click. However, I can provide the common work styles needed by Human Resources Managers according to O*NET:
1. Integrity
2. Dependability
3. Leadership
4. Self-Control
5. Attention to Detail
6. Cooperation
7. Adaptability/Flexibility
8. Initiative
9. Stress Tolerance
10. Achievement/Effort
Note that the order of these work styles may vary depending on the source and context.
Explanation:
please follow me for more if you need any help
Which of the following best describes an objective statement?
A.an understanding to follow certain procedures
B.a goal or aim
C.a subset of specific information
D.a written contract
Answers
Answer:
B
Explanation:
A short statement that describes what you want
A goal or aim best describes an objective statement.
What is objective statement?
Objectives are utilised in many different corporate and job-search scenarios. They are brief sentences that express just what you desire. While your ultimate objective may be to find work, your resume statement may mention that you wish to work as a nurse. In a business setting, aim statements contain specifics on how you intend to attain a corporate goal. In the past, one of the most typical places to see goal statements was in resumes. They were the one to three lines of text at the top of a resume that notified an employer a little about the candidate's level of experience and the type of job they desired.
An objective statement is a brief, position-centered statement that describes the value you can provide and the needs you can meet. A concise explanation of the skills and qualifications you will offer to a position may be included in an objective. A professional summary is more detailed and longer than an objective statement.
So, the right answer is B.
To learn more about objective statement
https://brainly.com/question/18076380
#SPJ2
An organization sets its standards for quality according to the best product it can produce.
True
False
Answers
Answer:
True!! took the test
Explanation:
Describe the extent of their own responsibility. When to act on their own innitiative to find , clarify and evaluate information , and to whom they should report if they have problems they cannot resolve in the work place
Answers
Answer:
whatsthe question choices
Given that the system function of a third order Butterworth type analog low-pass filter with a 3 dB cut-off frequency of 2 radian/second is:
2s HS = S2 + 0.2 s +1
Answer the following questions:
1. Use the bilinear transformation to obtain H(z). Use T=2 second.
2. Give H(w) for your filter.
3. Use MATLAB to give the magnitude spectrum.
4. Comment on the quality of the design.
5. With the aid of simple sketch graphs explain how frequency warping affects the frequency response of the digital filter.
6. Comment on the need for prewarping, i.e. give conditions when prewarping is needed.
Answers
answer
d just too the test
Write a program that reads integers from the user and stores them in a list. Use 0 as a sentinel value to mark the end of the input. Once all of the values have been read your program should display them (except for the 0) in reverse order, with one value appearing on each line.
Answers
Answer:
The program is written in Python:
num = int(input("User Input: "))
mylist = []
while(num !=0):
mylist.append(num)
num = int(input("User Input: "))
mylist.reverse()
for i in mylist:
print(i,end = ' ')
Explanation:
This question is answered using Python and it uses 0 as a sentinel value; i.e. the program stops prompting user for input when user enters 0
This line prompts user for input
num = int(input("User Input: "))
This line declares an empty list
mylist = []
This loop is repeated as long as user enters input other than 0
while(num !=0):
This appends user input to the list
mylist.append(num)
This prompts user for another input
num = int(input("User Input: "))
This reverses the list
mylist.reverse()
The following iteration the list in reverse order
for i in mylist:
print(i,end = ' ')
The easiest way to reduce your exposure to dangerous fumes is to keep your head out of a fume plume, making sure that you're breathing the cleanest air possible.
Answers
Answer:
keep your head out of a fume plume
Explanation:
According to the guidelines and precaution procedures of OSHA, an acronym for Occupational Safety and Health Administration in the United States of America stated that The easiest way for an individual to reduce his or her exposure to dangerous fumes is to ensure that such person keeps his or her head out of a fume plume.
Hence, in this situation, the correct answer is "keep your head out of a fume plume"
a 406 mm shaft has a uniform taper of 0.05 mm in 101.5 mm. what is the taper in the entire length of the shaft?
Answers
The taper in the entire length of the shaft is **0.505 mm**.
A shaft is a mechanical component used to transmit rotational motion and power between different parts of a machine. It is a long, cylindrical rod typically made of metal, and it plays a crucial role in various applications such as engines, pumps, and industrial machinery.
To calculate the taper in the entire length of the shaft, we can use the formula:
Taper = (Taper per unit length) x (Total length).
In this case, the taper per unit length is 0.05 mm in 101.5 mm, which is equivalent to 0.00049 mm per mm.
The total length of the shaft is 406 mm. By substituting these values into the formula,
we get: Taper = 0.00049 mm/mm x 406 mm = 0.19954 mm
. Rounding this value to three decimal places, the taper in the entire length of the shaft is approximately 0.505 mm.
Learn more about shaft here:
brainly.com/question/28139332
#SPJ11
The tributary width for the girder on Grid B between Grids 1 and 2 is most nearly.... 15 ft. The tributary area of the column A/3 is most nearly.
Answers
The tributary width for the girder on Grid B between Grids 1 and 2 is most nearly 15 ft. This means that the girder is responsible for carrying the load of the structure over an area that is 15 ft wide.
The tributary area of the column A/3 is most nearly the area of the floor or roof that is supported by the column. To calculate this, we need to determine the distance from the center of the column to the next column or wall in each direction. Assuming that the distance to the next column or wall in each direction is the same, we can calculate the tributary area as follows:
Tributary area = (distance to next column or wall)^2
If the distance to the next column or wall is A, then the tributary area is:
Tributary area = (A/3)^2 = A^2/9
So, the tributary area of the column A/3 is most nearly A^2/9.
To answer your question, the tributary width for the girder on Grid B between Grids 1 and 2 is approximately 15 feet. To find the tributary area of the column A/3, you will need additional information such as the tributary length or other relevant dimensions. Once you have that information, you can simply multiply the tributary width by the tributary length to find the tributary area of column A/3.
Learn more about girder about
https://brainly.com/question/30128832
#SPJ11
requires a mix of machines, equipment, energy and labor
Answers
Answer:
building?
Explanation:
Fatigue is a failure caused by a repetitive or fluctuating stress that is much lower than that required to cause fracture on a single application of load.(A) True(B) False
Answers
The given statement "Fatigue is defined as a failure caused by a repetitive or fluctuating stress that is much lower than that required to cause fracture on a single application of load" is true because the fatigue failure of materials subjected to cyclic loading is a slow and progressive process, culminating in the sudden and rapid growth of the crack to complete separation. So, the correct option is A.
The fatigue failure mode is the most common type of failure that occurs due to dynamic loading on metallic and nonmetallic materials. Fatigue failure is prevalent in almost all materials, including metals, non-metals, and composites. Although the materials possess sufficient strength, the presence of a flaw in the material can cause it to fail under fatigue loading. This type of failure occurs when the cyclic stresses generate microscopic cracks, which coalesce and lead to macroscopic cracks.
The cracking process is usually slow and takes several cycles before the crack propagates to the extent that the material fails catastrophically. The factors that influence the fatigue failure of materials include cyclic load, mean stress, surface finish, temperature, and corrosive media. The cyclic loading conditions include amplitude, frequency, and waveform of the load. The mean stress is the average stress during one cycle.
The surface finish of the material plays a crucial role in the initiation and propagation of the crack. The higher the surface roughness, the more likely it is that a crack will initiate at that location. The temperature and corrosive media affect the fatigue failure of the material by promoting chemical reactions that can accelerate the cracking process.
You can learn more about fatigue failure at: brainly.com/question/13039661
#SPJ11
Which of the following statements correctly declare and initialize an array? (check all that apply) int[] numbers = new char(15); char letters - new char[26]; char[26] letters = new chari: char[] letters = new char[]{'a', 'b', 'd'); int[] numbers = {1, 2, 3, 4); Consider the following array.
Answers
Among the given statements options, the correctly declare and initialize an array are:
char[] letters = new char[26];char[] letters = new char[]{'a', 'b', 'd'};int[] numbers = {1, 2, 3, 4};What is the array?An array is a way to hold a set number of items with the same characteristics as a single unit in a data structure. It offers a means to consolidate numerous values with identical data types into a solitary variable designation.
To retrieve a specific element from an array, its position within the array needs to be indicated through a non-negative integer known as the index.
Learn more about array from
https://brainly.com/question/24275089
#SPJ4
See text below
Consider the following array. float scores - new float(5):
Du
7. an electromagnetic field (emf) is a cloud of electrically charged objects from cords and wires. the biggest hazard
with emfs is associated with
Answers
The biggest hazard with emfs is associated with cancer risks, as per the some studies.
What causes EMF to increase?The electrical current-carrying wires in your home are probably the source of a large portion of your EMF exposure.
Additionally, being close to electrical appliances like refrigerators, microwaves, and washing machines exposes you to short-term high exposures. Moving further away from these appliances causes the EMF radiation to abruptly decrease.
A broad range of symptoms have been attributed by some members of the public to low levels of electromagnetic field exposure at home. There have been reports of headaches, anxiety, self harm thoughts, sadness, nausea, and even cancer.
Thus, these are some risk factors associated with EMF.
For more details regarding EMF, visit:
https://brainly.com/question/15121836
#SPJ4
Find: factor of safety (n)for point A and B by using both MSS and DE (you can neglect shear stress due to shear force and also neglect stress concentration)
Answers
Answer:
Hello your question is incomplete attached below is the complete question
Answer : Factor of safety for point A :
i) using MSS
(Fos)MSS = 3.22
ii) using DE
(Fos)DE = 3.27
Factor of safety for point B
i) using MSS
(Fos)MSS = 3.04
ii) using DE
(Fos)DE = 3.604
Explanation:
Factor of safety for point A :
i) using MSS
(Fos)MSS = 3.22
ii) using DE
(Fos)DE = 3.27
Factor of safety for point B
i) using MSS
(Fos)MSS = 3.04
ii) using DE
(Fos)DE = 3.604
Attached below is the detailed solution
Some_____
include peanut butter, bacon, and chocolate.
Snap traps baits
Glue boards
Catchalls
IGRs
Bait stations
Answers
Answer:
it’s IGS
Explanation:
because i read
Answer:
snap trap baits
Explanation: its kind of obvi, but i took the test and got it right.
Which XXX calculates and prints the total cost? #include #include typedef struct Item_struct{ double price; int quantity; double itemCost; } Item; typedef struct Order_struct{ int Order Number; double total; } Order; int main(void) { Item book1; Item book2; Order amount; book1. ItemCost = book1. Price* book1. Quantity: book2. ItemCost = book2. Price* book2. Quantity: XXX } a. Amount = book1. ItemCost + book2. ItemCost; b. Amount. Total = book1. ItemCost + book2. Item Cost; c. Amount = book1. Price + book2. Price; d. Amount total - book1. Price + book2 price;
Answers
According to the statement, the total cost is Amount.Total = book1.ItemCost + book2.ItemCost; The correct answer is b.
This is because the "Amount" variable is a struct of type "Order", which contains an "Order Number" and a "total" variable. To calculate the total cost of the order, you need to add the item costs of both books and assign the result to the "total" variable of the "Amount" struct.
This is done by using the dot operator to access the "total" variable of the "Amount" struct and assigning the sum of the item costs to it. Option b correctly does this, while the other options either assign the sum to the wrong variable or calculate the sum using the wrong variables.
Learn more about total cost:
https://brainly.com/question/25109150
#SPJ11
According to the statement, the total cost is Amount.Total = book1.ItemCost + book2.ItemCost; The correct answer is b.
This is because the "Amount" variable is a struct of type "Order", which contains an "Order Number" and a "total" variable. To calculate the total cost of the order, you need to add the item costs of both books and assign the result to the "total" variable of the "Amount" struct.
This is done by using the dot operator to access the "total" variable of the "Amount" struct and assigning the sum of the item costs to it. Option b correctly does this, while the other options either assign the sum to the wrong variable or calculate the sum using the wrong variables.
Learn more about total cost:
brainly.com/question/25109150
#SPJ11
4.13 the following are the coordinates of a smooth curve drawn to best represent the
stage-discharge data of a river.
stage (m) 20.80 21.42 21.95 23.37 23.00 23.52 23.90
discharge (m3
/s) 100 200 300 400 600 800 1000
determine the stage corresponding to zero discharge.
Answers
Finding the point on the curve where the discharge is zero or very near to zero will help us identify the stage that corresponds to zero discharge.
A concept known as "zero discharge" seeks to reduce or completely stop the release of pollutants or wastewater into the environment. It describes a situation in which there are no direct or indirect releases of wastewater or other pollutants into surface water or groundwater. A mix of pollution prevention and control strategies, including water consumption reduction, high-quality wastewater treatment, water recycling and reuse, and the adoption of more environmentally friendly manufacturing techniques, are needed to achieve zero discharge. The preservation of water resources, the promotion of sustainable development, and the protection of human health and the environment are all advantages of zero discharge. Zero discharge is becoming more and more significant in a variety of fields, including business, farming, and municipal wastewater treatment.
Learn more about zero discharge here:
https://brainly.com/question/6178019
#SPJ4
1.20 Three wooden planks are fastened together by a series of bolts to form a column. The diameter of each bolt is 12 mm and the inner diameter of each washer is 16 mm, which is slightly larger than the diameter of the holes in the planks. Determine the smallest allowable outer diameter d of the washers, knowing that the average normal stress in the bolts is 36 MPa and that the bearing stress between the washers and the planks must not exceed 8.5 MPa.
Answers
check photo solve
check photo solve
check photo solve
the smallest allowable outer diameter (d) of the washers is approximately 50.82 mm, considering the average normal stress in the bolts and the bearing stress between the washers and the planks.
What is the the average normal stressThe average normal stress in the bolts is given as 36 MPa, which is equal to 36 N/mm².
So, σ_avg = 36 N/mm² = 36 MPa
The bearing stress between the washers and the planks must not exceed 8.5 MPa, which is equal to 8.5 N/mm².
So, σ_bearing = 8.5 N/mm² = 8.5 MPa
Now, using the relationship between the bearing stress and the average normal stress:
σ_bearing = σ_avg * (d_bolt / d_washer)
8.5 = 36 * (12 mm / d_washer)
Now, solve for d_washer:
d_washer = 36 * 12 mm / 8.5
d_washer = 50.82 mm
Since the washer's inner diameter is 16 mm, the difference between the inner and outer diameters of the washers is 2 * t (the thickness of the washers).
So, d_washer - 16 mm = 2 * t
t = (d_washer - 16 mm) / 2
t ≈ (50.82 mm - 16 mm) / 2
t ≈ 17.41 mm
Read more about the average normal stress here:
https://brainly.com/question/14293037
#SPJ3
4.
Describe the correct use of any equipment used to protect the health and safety of themselves and
their colleagues
Answers
Items like gloves, safety glasses, shoes, earplugs or muffs, hard helmets, respirators, or coveralls, vests, and full body suits are examples of personal protection equipment.
What equipment is are used for safety and protection?Wearing a safety helmet when using a power tool, donning the proper safety gear when dealing with chemicals, and taking all necessary measures when operating machinery are examples of the proper use of any equipment used to safeguard their health and the health of their coworkers.
Gloves, safety goggles, shoes, earplugs, respirators, hard hats, coveralls, vests, and full body suits are examples of personal protection equipment.
Healthcare Facilities Using PPE:
Gloves safeguard the hands; gowns or aprons defend the skin or clothing; masks and respirators screen the mouth and nose; goggles guard the eyes; and face shields cover the complete face.
To learn more about personal protection equipment refer to:
https://brainly.com/question/13720623
#SPJ1
Determine the tensile and yield strengths for the following materials:
(a) UNS G10200 hot-rolled steel.
(b) SAE 1050 cold-drawn steel.
(c) AISI 1141 steel quenched and tempered at 540°C.
(d) 2024-T4 aluminum alloy.
(e) Ti-6Al-4V annealed titanium alloy.
Answers
Tensile strength and yield strength of materials can vary depending on the specifics of the manufacturing process, exact chemical composition, and the treatment of the material. They are usually provided by the manufacturer in a materials property datasheet. I don't have real-time access to such specific databases or proprietary materials databases to provide these values.
However, I can give you a general idea based on typical values for similar materials:
(a) UNS G10200 hot-rolled steel (also known as AISI 1020 steel):
- Tensile Strength: around 420 MPa
- Yield Strength: around 350 MPa
(b) SAE 1050 cold-drawn steel:
- Tensile Strength: around 690 MPa
- Yield Strength: around 600 MPa
(c) AISI 1141 steel quenched and tempered at 540°C:
- Tensile Strength: around 760 MPa
- Yield Strength: around 690 MPa
(d) 2024-T4 aluminum alloy:
- Tensile Strength: around 470 MPa
- Yield Strength: around 325 MPa
(e) Ti-6Al-4V annealed titanium alloy:
- Tensile Strength: around 900 MPa
- Yield Strength: around 880 MPa
These are general values and actual values can vary based on exact processing conditions and slight differences in alloying elements. For precise values, you should refer to the material's datasheet provided by the manufacturer or a reliable materials database.
In relation to mine planning and design define scheduling
Answers
Answer:
Scheduling is a process of create a structure that shows the way a schedule is organized before developing a complete and final schedule of a project.
Explanation:
This is the initial step in of developing a project schedule for a capital cost project. At this stage, the estimates for the project are done involving the various actions in the project. A lot of details are included in this schedule showing the activities that are to be performed and the constraints involved.
Water vapor at 5 bar, 3208C enters a turbine operating at steady state with a volumetric flow rate of 0.65 m3/s and expands adiabatically to an exit state of 1 bar, 1608C. Kinetic and potential energy effects are negligible. Determine for the turbine (a) the power developed, in kW, (b) the rate of entropy production, in kW/K, and (c) the isentropic turbine efficiency.
Answers
Answer:
A) 371.28 kW
b) 0.1547 Kw/K
c) 85%
Explanation:
pressure (p1) = 5 bar
exit pressure ( p2 ) = 1 bar
Initial Temperature ( T1 ) = 320°C
Final temp ( T2 ) = 160°C
Volume ( V ) = 0.65 m^3/s
A) Calculate power developed ( kW )
P = m( h1 - h2 ) = 1.2 ( 3105.6 - 2796.2 ) = 371.28 kW
B) Calculate the rate of entropy production
Δs = m ( S2 - S1 ) = 1.2 ( 7.6597 - 7.5308 ) = 0.1547 Kw/K
c) Calculate the isentropic turbine efficiency
For an isentropic condition : S2s = S1
therefore at state , value of h2 at isentropic condition
attached below is the remaining part of the solution
Note : values of [ h1, h2, s1, s2 , v1 and m ] are gotten from the steam tables at state 1 and state 2
Tech A says that a mechanical pressure regulator exhausts excess fluid back to the transmission pan. Tech B says that if the transmission pan is removed, the magnet must be replaced. Who is correct?
Answers
Answer:
A
Explanation:
A house is maintained at a comfortable temperature by means of an electrical resistor heater during winter. The heater is operated at a constant current (I) under an applied voltage of 110 V. For simplicity, let us assume that the heater operates at a steady state, with 100% of conversion efficiency from the electrical energy to the internal energy of air in the house.
Required:
Find if the instructor pays $8.80/day for heating, with electricity cost $0.09/kWh.
b. Calculate the heat produced by such a heater hourly.
Answers
Answer:
$8.89
Explanation:
$8.80/a day for heat and $0.09kwh for electricity
A structural component is fabricated from an alloy that has a plane-strain fracture toughness of 62 MPa√m. It has been determined that this component fails at a stress of 250 MPa when the maximum length of an internal crack is 1.6 mm. What is the maximum allowable internal crack length (in mm) without fracture for this same component exposed to a stress of 250 MPa and made from another alloy that has a plane strain fracture toughness of 40 MPa√m?
Answers
Answer:
0.67 mm
Explanation:
Solution:
We find the dimensionless parameters by applying the critical stress crack propagation formula stated below:
σс= Klc/Y√πa
Y = Klc/σс √πa
σс = this is the critical stress needed for initial cracking propagation
Klc = the plain stress fracture toughness
a = surface length of the crack
Y = the dimensionless parameter
Now, we substitute the values 62MPa√m for Klc, 250 MPa for σс and 1.6 * 10 ^⁻3 for a in the dimensionless parameter equation.
Thus,
Y = Klc/σс √πa
= 62/250(√π * 1.6* 10 ^⁻3)
= 3.492
The next step is to find the maximum permitted surface crack length by applying the critical stress crack propagation equation given below:
σс= Klc/Y√πa
a= 1/π (Klc/Yσс)²
Now, substitute 40 MPa√m for Klc, 250 MPa for σс and 3.492 for surface length crack equation
So,
a= 1/π (Klc/Yσс)²
= 1/π[40/3.492 * 250]²
=1/π[40/873]²
=1/π[0.0458]²
0.318[0.0458]²
=0.318[0.00209]
= 0.0066
0.67* 10 ^⁻3 m
= 0.67 mm
Therefore the maximum surface crack length produced is 0.67 mm
When a storm hits while a vessel is underway,the operator should do which of the following? a. Takes waves from the port or starboard side,never head on.
b. Ensure that all those aboard are wearing aPersonal Flotation Device.
c. Keep all electrical equipment plugged in - evenif lightning is present.
d. Shift all passengers to the highest pointonboard the boat.
Answers
When a storm hits while a vessel is underway, the operator should ensure that all those aboard are wearing a Personal Flotation Device.
During a storm at sea, safety precautions are crucial. The operator should prioritize the safety of all individuals aboard the vessel. One of the key measures is to ensure that everyone is wearing a Personal Flotation Device (PFD) or a life jacket. PFDs provide buoyancy and can potentially save lives in case of an emergency or if someone falls overboard.
Know more about Personal Flotation Device here:
https://brainly.com/question/30748194
#SPJ11
Which of the forces applied to the block perform nonconservative work on the system? Check all that apply. - normal force - weight of the block - applied force - spring force - friction Learning Goal: To use the conservation of energy with nonconservative forces to determine the maximum height and velocity for a block moving on a ramp.
The block shown in slides on the ramp and is attached to the spring. At the starting point, the spring is not stretched or compressed and the block has a velocity up the ramp of vi = 3.7 m/s. A force F = 230 N is also applied to the block, parallel to the ramp. The coefficient of friction between the block and the ramp is μk = 0.25, the spring constant is k = 600 N/m, the mass of the block is m = 7 kg, and the angle of the ramp is θ = 33° Use the conservation of energy Ti +V1 + (ΣU1-2) noncons = T2 + V2
Answers
The forces applied to the block that perform nonconservative work on the system are: Applied force friction
Friction is a force that resists the motion between two surfaces that are in contact.. Nonconservative forces are forces that dissipate the mechanical energy of a system. The forces that perform nonconservative work are the applied force and the frictional force.
The normal force and the spring force are conservative forces because they do not dissipate mechanical energy but rather conserve it. They do not perform nonconservative work.
Friction can both be beneficial and harmful. For example, it can be useful for preventing slipping and sliding of objects.
Learn more about mechanical energy: https://brainly.com/question/28154924
#SPJ11
Which tasks do schedules help you do at home? Choose three.
A spending time with family
B going to bed on time
c doing homework
D going to recess
Answers
Answer:
The answer would most likely be c
Identify three advantages to being accountable for your gear in the fire camp
Answers
Being accountable for your gear in the fire camp is essential, and it is important to ensure that you have all of the necessary equipment for the job. There are several advantages to being accountable for your gear in the fire camp, and Increased efficiency:
One of the biggest advantages of being accountable for your gear in the fire camp is increased efficiency. When you have all of the necessary equipment and know exactly where it is, you can quickly and easily access it when you need it. This can help you to work faster and more efficiently, which can be critical in a fire situation
Safety: Another advantage of being accountable for your gear in the fire camp is safety. When you have all of your equipment and know exactly where it is, you can ensure that you are properly protected at all times. This can be especially important in a fire situation where there are many hazards present.
Better communication: being accountable for your gear in the fire camp can lead to better communication. When everyone knows where their gear is and has it readily available, they can communicate more effectively with one another. This can help to ensure that everyone is on the same page and that there are no misunderstandings or miscommunications.
Being accountable for your gear in the fire camp is critical for a successful mission. By keeping track of your equipment and ensuring that it is always available when you need it, you can increase efficiency, safety, and communication, which can be essential in a fire situation.
To know more about miscommunications visit:-
https://brainly.com/question/8635385
#SPJ11
All of these are true about using adhesive EXCEPT:
Answers
Answer:
Except what? I'm confused
All of these are true about using adhesive except Bilateral. A bilateral contract is defined as an agreements between two parties in which each side agrees to fulfill his or her side of the bargain.
What is bilateral contract?A bilateral contract is defined as an agreements between two parties in which each side agrees to fulfill his or her side of the bargain. According to my research on the different terms used when referencing an insurance contract, I can say that all of the answers provided except for Bilateral are considered typical characteristics describing the nature of an insurance contract.
Since an insurance contract is a fund that the insurance company pays in the case of an accident in which the person is injured, there is only one party that agrees to fulfill their side of the bargain and that is the insurance company.
Therefore, All of these are true about using adhesive except Bilateral. A bilateral contract is defined as an agreements between two parties in which each side agrees to fulfill his or her side of the bargain.
Learn more about adhesive on:
https://brainly.com/question/29061431
#SPJ2